Archive for the ‘Cutter’ tag
Cheap Makita DPC7300 12-Inch 73cc Power Cutter
Makita DPC7300 Features
- 73cc power cutter with 12-inch blade (20mm arbor)
- Superior vibration dampening system
- Internal electronic microprocessor ignition
- Five-stage , large capacity air filter system
- Multi-position diaphragm carburetor; quick-Access air filter
Cheap Makita 4101RH 5-Inch Cutter
Makita 4101RH Features
- Powerful 7.9 amp motor
- Cover design prevents water from entering motor housing
- Cuts up to 1-3/8 inches at 90 degrees and 13/16 inch at 45 degrees
- Ground fault circuit interrupter (GFCI) plug
- Lock-on button for continuous use
Makita 4101RH Overview
This wet-cutting masonry saw cuts through tile, masonry, concrete and more! Powerful 7.9 Amp motor cuts up to 1 3/8in. at 90deg , and 13/16in. at 45deg . Airtight cover keeps water out of motor housing. Amps: 7.9.
Read the rest of this entry »
Cheap Makita DPC7311 73cc 14-Inch Gas Powered Power Cutter
Makita DPC7311 Features
- Improved 5-Stage air filtration system is 80% larger that before.
- Microchip controlled carburetor adjusts to work load.
- Quick-action guard adjustment and easy cutting arm position change.
- Compression release valve for easy starting.
- Single knob access to primary air filter and spark plug.
Makita DPC7311 Overview
Makita DPC7311 Specifications: Engine Displacement (cu.in.) 4.5 Max. power (HP) 5.6 No Load RPM 9,350 Max. spindle speed 4,300 Wheel diameter 14″ Arbor 1″ (w/adaptor) Max. cutting depth 4-13/16″ Makita DPC7311 Includes: 14″ Cut-off wheel (965-210-222) Diamond Blade on Picture is Optional Universal wrench (941-719-140) Torx wrench (940-827-000) Screwdriver (944-340-001) Adaptor Ring (22 mm to 1″) (394-228-120) Makita DPC7311 Features: Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle Improved ignition system with larger flywheel and rare earth magnets for more power Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground Starter grip and decompression valve located on the same side for faster starting On-Off-Choke operating switch on a single lever for operator convenience Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Read the rest of this entry »